LPKF ProtoMat S42 information

This page contains some information for students using the LPKF ProtoMat S42 in the laboratory of Professors Smith and Maguire.


Cutters and routers

The usual cutter is a Universal cutter (Universalfräs) with a cutting diameter (räsdiamater) of 0.2 - 0.5 mm

The main contour router (Konturfräs) has a cutting diameter (Fräsdiameter of 1.60 mm


Drilling dimater (Borrdiameter): 0.6mm, 0.8mm, and 0.9mm

Board stock

Double sided FR4 sheets 229 mm x 305 mm (9 inch x 12 inch) with 35/35 Ám copper in the special format for the ProtoMat S-series (i.e., with pre-drilled (förborrade) 3 mm holes.

There is also some single sided board stock.

Offical disclaimer required by KTH central administration [disclaimer]

Detta är en personlig hemsida och åsikter framförda här eller i tillhandahållna länkar representerar inte KTH.

This is a personal homepage. Opinions expressed here or implied by links provided, do not represent the official views of KTH.

For information contact maguire@kth.se
Latest update 22 January 2015
© 2012,2015 G. Q. Maguire Jr., KTH/ICT

Valid HTML 4.01 Transitional